Blasting out a super-bright 80 lumens of light, this front bike light ensures that you’ll be lit up like a beacon to all other road users up to 1.2 km away. Incorporating 16 surface mounted LEDs as well as a reflective faceplate, long battery life and a beam angle of 90° (not to mention the 5 different light modes) you’re guaranteed to light up the path no matter where you ride. And its secret weapon? 2x interchangeable straps so you can swap the lights between bikes with different sized handlebars – including oversize bars.
FUNCTION:Front Bike Light LIGHT OUTPUT : 80 lumens DIMENSIONS : 42 x 42 x 62mm WEIGHT : 35g
100% WATERPROOF : The Blinder MOB is IP67 Tested and 100% waterproof against all elements
BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously.
INTEGRATED USB PLUG : No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements
LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.
CHARGE TIME :4 -5 hours (LED will turn green when fully charged)
BATTERY : USB Rechargeable Lithium Polymer
BIKE ATTACHMENT :Tool-less removable silicone straps for bars 22 - 32mm+ diameter. Fits Oversize bars.
ACCESSORIES INCLUDED : 2x interchangeable straps for bars 22-27mm / 28-32mm+.
To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds and release when red LED comes on. This LED will stay lit until the light drops into storage mode.
To reactivate light, plug into USB port and charge as usual. Once charged light will turn on as before.
When plugging the light into a USB port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete.